- Microstructure and Hardness of TiC Particle-reinforced Fe Self-fluxing Alloy Powders Based Hybrid Composite Prepared by High Energy Ball Milling
-
Sung-Jin Park, Yo-Seung Song, Ki-Seok Nam, Si-Young Chang
-
J Korean Powder Metall Inst. 2012;19(2):122-126.
-
DOI: https://doi.org/10.4150/KPMI.2012.19.2.122
-
-
18
View
-
0
Download
-
1
Citations
-
 Abstract
 PDF
- The Fe-based self-fluxing alloy powders and TiC particles were ball-milled and subsequently compacted and sintered at various temperatures, resulting in the TiC particle-reinforced Fe self-fluxing alloy hybrid composite, and the microstructure and micro-hardness were investigated. The initial Fe-based self-fluxing alloy powders and TiC particles showed the spherical shape with a mean size of approximately 80 µm and the irregular shape of less than 5 µm, respectively. After ball-milling at 800 rpm for 5 h, the powder mixture of Fe-based self-fluxing alloy powders and TiC particles formed into the agglomerated powders with the size of approximately 10 µm that was composed of the nanosized TiC particles and nano-sized alloy particles. The TiC particle-reinforced Fe-based self-fluxing alloy hybrid composite sintered at 1173 K revealed a much denser microstructure and higher micro-hardness than that sintered at 1073 K and 1273 K.
-
Citations
Citations to this article as recorded by  - Compaction and Sintering Characteristics of High Energy Ball Milled Mn-Zn Ferrite Powders
Hyunseung Lee, Hoseong Rhee, Sangsoo Lee, Si Young Chang
Korean Journal of Materials Research.2021; 31(12): 677. CrossRef
|
kpmi
